[MSCW list] stiff crank
Fadi Tarapolsi
ibnfawzi
Wed Nov 14 18:17:59 CET 2007
In my '91 a stiff crank was soon followed by a snapped cable. mazda
didn't use a lot of weather sealing around the window and the cable is
prone to rusting, then fraying, then breaking. if you take the door
panel off, and there is rust on the cable, might want to go ahead and
replace it.
-Fadi
Message: 6
Date: Tue, 13 Nov 2007 20:32:20 EST
From: Jmccombs3 at aol.com
Subject: Re: [MSCW list] MSCW Digest, Vol 27, Issue 2 (stiff crank)
To: mscw at mscw1.com
Message-ID: <bd9.2158cd6a.346baa24 at aol.com>
Content-Type: text/plain; charset="us-ascii"
RE: The "stiff crank" problem with your Miata windows: We have a '90 and a
'92, and the '92 is still doing fine, but I find the same problem with the
'90 driver side - not so bad rolling the window up, but a bear getting it down.
One problem I've heard of in the past, was that the actuator cable would
come out of its retainer inside the door. I seem to recall this problem with
the passenger side on the '90 some several years ago, and it wasn't that
difficult to fix, once I got around to it. But the symptom was that the window
was jammed. (Made you look like a dork, driving around with the top down and
the right window up - and I don't need any more help in looking like a dork.)
Anyway, it's pretty easy to take the inner door panel off and have a look
around, which it appears you've done in the past if you've lubed everything.
As I recall, that slipped retainer problem was not all that evident in looking
around inside the door. You might have another look. I ought to do this
myself sometime, considering that I have the same "stiff crank" problem with
our '90.
--Jack M. & '90 & '92 Miatae--
More information about the MSCW
mailing list